Lcd Display And Keypad - MCi iControl User Manual

LCD Display and Keypad

The iBox LCD display and keypad allow you to:
• View and change parameter settings
• View and register calls
• View the status of inputs, outputs, and flags
• View error messages and the system event log
Typically, when you need to view or change parameters in an iControl, you connect to the iBox
through the PC or LAN ethernet port and use the iView graphical user interface running on a
Windows OS PC to easily access, view, or edit any desired parameter. However, during initial
system setup when setting the parameters that allow PC access to your system, or when a PC is
not available, some parameters can be directly accessed and edited through the keypad and
LCD display located on the front panel of every iBox.
Figure 7.2 iBox Data Entry Keypad and LCD Display
@040 001 F R L01
Passenger
0fpm
6:15:09AM
11/30/2003
Car
1 2 3 4
ENTER
LCD Display and Keypad
LCD Display
COMPUTER
RESET
Softkeys
FAULT
RESET
Directional Arrows /
Value Incrementers
Select Parameter /
Enter Value
7
7-3