MCi iControl User Manual page 515

Door Operation Rear
elevator has arrived at the recall floor (after all car calls have been answered).
• Keep closed: The rear doors shall remain closed.
• Keep open: The rear doors shall open and remain open.
• Open doors for "xx" sec: The rear doors shall open for the amount of time specified, the
reclose.
• Respond to door open button: Specifies that the rear doors shall respond to activation of
the rear door open button (once the car has arrived at the recall floor). If this option is
selected, the rear door open button remains operative at all times. If not selected, the rear
door open button will be rendered inoperative when the rear doors are closed at the recall
floor. (Note: The door open button will always remain operative when the associated doors
are open).
Hoistway Access Recall
eter settings for the selected recall switch (1 - 6), to be activated by one of the Hoistway Access
direction switches. This allows the mechanic to recall the car prior to placing it on access opera-
tion.
• Assign this recall to the following hoistway access input:
• No access recall:
• ATU - Access Top Up: Activation of the ATU switch/input shall cause the car to recall
per the selected recall switch (1 - 6) parameter settings.
• ATD - Access Top Down: Activation of the ATD switch/input shall cause the car to
recall per the selected recall switch (1 - 6) parameter settings.
• ABU - Access Bottom Up: Activation of the ABU switch/input shall cause the car to
recall per the selected recall switch (1 - 6) parameter settings.
• ABD - Access Bottom Down: Activation of the ABD switch/input shall cause the car to
recall per the selected recall switch (1 - 6) parameter settings.
Determines how the elevator rear doors shall operate once the
This control allows the recall operation, based on the param-
Configuration - Car Operation
9
9-63