Controller - Firmware Update - MCi iControl User Manual

Controller - Firmware Update

Warning! Do not attempt this procedure without
first contacting MCE Technical Support. Failure to
do so can result in catastrophic failure of the iBox.
Firmware Update allows you to install updated iControl operating software. It is likely that two
firmware program files will be updated. They are:
• Bootrom.mce, the iControl boot up program.
• vxworks.mce, the iControl IMP computer program.
To update iControl firmware:
1. Copy the new Bootrom.mce (Bootrom folder) and vxworks.mce (IMP folder) files to
the desktop of the computer being used to perform the firmware update.
2. Use iView to connect to the iBox on which the firmware is being updated.
3. If you want to save the configuration settings for later re-loading, select Save from the
File > Configuration File menu. In the Save Configuration File dialog, type a name in
the File name: box and click Save.
tion File" on page
4. Select Firmware Update from the File menu.
5. Click Yes in the dialog "This action will automatically deactivate all screens. Proceed?"
Please refer to "Saving Parameters to a Configura-
8-20.
Controller - Firmware Update
9
9-155