MCi iControl User Manual page 562

iView - Controller View
equipment in that hoistway or machine room. Activation of sensors will initiate recall
to the alternate recall floor and cause the fire warning indicator in the car to flash.
• This Car Main: Input from the smoke sensors located in the hoistway or machine room
if the machine room is at any floor other than the main recall floor and if the car has
any equipment in that hoistway or machine room. Activation of sensors will initiate
recall to the main recall floor and cause the fire warning indicator in the car to flash.
• Front Door
• Disable Front Hall Door Buttons: Input used to disable the front hall door buttons.
• Front COP2 Door Close Button: Input from the front auxiliary door close button:
• Front COP2 Door Hold Button: Input from the front auxiliary door hold button.
• Front COP2 Door Open Button: Input from the front auxiliary door open button.
• Front COP2 Door Stop Button: Input from the front auxiliary door stop button (active
low).
• Front Constant Pressure Close: Activation overrides front door close software settings.
• Front Constant Pressure Open: Activation overrides front door open software settings.
• Front Door Close Button (COP1): Input from the front main door close button.
• Front Door Hold Button (COP1): Input from the front main door hold button.
• Front Door Open Button (COP1): Input from the front main door open button.
• Front Door Stop Button (COP1): Input from front main door stop button (active low).
• Front Hall Door Close Button: Input from a front hall door close button.
• Front Hall Door Hold Button: Input from a front hall door hold button.
• Front Hall Door Open Button: Input from a front hall door open button.
• Front Hall Door Stop Button: Input from a front hall door stop button (active low).
• Front Momentary Pressure Close: Overrides front door close software setting.
• Front Momentary Pressure Open: Overrides front door open software setting.
• Front Photo Eye Cut Out: Input from a front key switch - disables photo eye operation
• Rear Door
• Disable Rear Hall Door Buttons: Input used to disable the rear hall door buttons.
• Rear COP2 Door Close Button: Input from the rear auxiliary door close button:
• Rear COP2 Door Hold Button: Input from the rear auxiliary door hold button.
• Rear COP2 Door Open Button: Input from the rear auxiliary door 0pen button.
• Rear COP2 Door Stop Button: Input from the rear auxiliary door stop button (active
low).
• Rear Constant Pressure Close: Activation overrides rear door close software settings.
• Rear Constant Pressure Open: Activation overrides rear door open software settings.
• Rear Door Close Button (COP1): Input from the rear main door close button.
• Rear Door Close Limit: Input from rear Door Close Limit switch.
• Rear Door Hold Button (COP1): Input from the rear main door hold button.
• Rear Door Open Button (COP1): Input from the rear main door open button.
• Rear Door Open Limit: Input from rear Door Open Limit switch.
9-110 Manual # 42-02-2222