Car Operation - Earthquake Tab - MCi iControl User Manual

iView - Controller View

Car Operation - Earthquake Tab

Allows selection of operating parameters during earthquake operation.
ing the Earthquake Sensor" on page 3-21
Earthquake Code
Caution
Changing earthquake parameter settings may cause you to be out of compliance with the
selected code and may require a variance. Note that some parameter settings are under-
lined, indicating that the setting is in compliance with the selected code.
changed to one that does not comply with the selected code, it will appear in
9-64 Manual # 42-02-2222
for additional information.
Select the earthquake code and version/year being used.
Please refer to "Install-
If a setting is
RED.