General - Manage Passwords - MCi iControl User Manual

iView - System View
To have the active security configuration set by timer table
1. Select Timed in Configuration Assignment.
2. Click Send.
3. Program one or more timer tables (System > Configuration > Timer tables tab).
Enable Hardware Override: The Security override - Master security override input is
ignored unless this control is activated.

General - Manage Passwords

Only the "manager" can set passwords. To change the password settings:
1. Logon using the manager's password. If you are changing the passwords from their ini-
tial settings, logon using the default password "manager".
2. Display the Manage Passwords tab (General > Manage Passwords).
3. Click the Set Pwd button. The Change password dialog is displayed.
4. Select the User (Manager or Technician) who's password is to be changed.
5. Enter the new password in the "New password:" text box.
6. Re-enter the new password in the "Re-enter pswd:" text box.
7. Click OK.
Note
If you forget the password, locate the job number and/or serial number of the controller and
contact MCE Technical Support at 916-463-9200.
Note
In order to activate security, physical device (card reader, key switch, etc.) inputs must be prop-
erly configured and wired.
10-40 Manual # 42-02-2222
Please refer to "Configuration - I/O Boards" on page 9-100.