Configuration Tabs - Security - MCi iControl User Manual

iView - System View

Configuration Tabs - Security

These parameters control elevator security by restricting hall and car call registration. For local
cars, operating under the direction of a central dispatcher (iCentral) or a Local/Dispatcher, ele-
vator security is controlled by settings made while iView is connected to iCentral or the Local/
Dispatcher. The parameters are stored on iCentral or the Local Dispatcher and are copied to all
Alternate Dispatchers. However, when the controller is configured as a simplex or swing car,
the security parameters are stored on the simplex or swing car controller. To change the param-
eters iView must be connected to the simplex or swing car controller.
When you select System > Security, the General > Status tab is displayed. Access to security set-
tings beyond viewing the general status is restricted to authorized users. There are two user
classes, manager and technician. The manager is allowed to set up and edit passwords, the tech-
nician is not. To log on:
1. Click the Logon button at the bottom of the
screen. The Logon dialog is displayed.
2. Enter the manager or technician password.
(Factory default passwords are "manager" for
manager logon and "technician" for techni-
cian logon.)
3. Click Ok. The menus that were previously
grayed-out will become available.
General - Status
10-38 Manual # 42-02-2222