General - Configuration - MCi iControl User Manual

The Status screen provides an overview of currently active security settings.
• Master security:
• Active: Lights if any security mode is active.
• Hardware override: Lights if security has been overridden by a switch input.
• Software override: Lights if security has been overridden by a software selection.
• Activate Override button: Activates software security override. Button caption changes
to Deactivate Override when override is activated.
• Active configuration:
• Display: Indicates the currently active security configuration.
• Hardware configuration: Lights if configuration was activated by a hardware switch.
• Software configuration: Lights if configuration activated by software setting.
• Timed configuration: Lights if configuration activated by system timer created using
the Configuration > Timer Tables tab.
• Hall call security overrides:
• Enable 1: Lights if hall call enable 1 input is activated by a card reader or keypad, etc.
(System View > Configuration > System I/O - System tab - Hall call enable 1 inputs).
• Enable 2: Lights if hall call enable 2 input is activated by a card reader or keypad, etc.
(System View > Configuration > System I/O > System tab - Hall call enable 2 inputs).
• Car call security override:
• Enable 1: Lights if a Car call enable 1 input is activated by a card reader or keypad, etc.
(Controller > Configuration > I/O Boards > MIAC or COP - Car call enable 1 inputs).
• Enable 2: Lights if a Car call enable 2 input is activated by a card reader or keypad, etc.
(Controller > Configuration > I/O Boards > MIAC or COP - Car call enable 2 inputs).

General - Configuration

This tab allows you to set the active security configuration manually or by timed assignment
and to Enable Hardware Override.
To set the security configuration manually
1. Select Manual in Configuration Assignment.
2. Set the desired configuration in the drop-down list.
3. Click Send.
Configuration Tabs - Security
10
10-39