MCi iControl User Manual page 316

Troubleshooting
Table 6.3 iControl Messages
Front DPM Open - GS Closed, F DPM OPEN-GS CLOSED
Description: The front door position monitoring contact is open while the gate switch is closed.
Car Reaction: None.
Troubleshooting: Check the front door position monitoring contact, gate switch and all related circuitry.
Front Hall Door Open Button Bypassed, FRONT HALL DOB BYP
Description: The front hall door open button has been continuously activated for a user-defined time (Door
open bypass timer) and is now bypassed in accordance with the user-defined setting (Car Operation Config-
uration/Doors tab/Advanced dialog).
Car Reaction: The front hall door open button is rendered inoperative.
Troubleshooting:
1. Check the corresponding input, Front Door - Hall Door Open Button: Normally low.
2. The operation of the hall door open button can also be restored by setting the Door open button bypass
option to off (unchecked) (Car Operation Configuration/Doors tab/Advanced dialog).
Front Photo Eye Bypassed, FRONT PHOTO EYE BYP
Description: The front photo eye device has been continuously activated for a user-defined time and is now
bypassed in accordance to the user-defined setting. (iView/Car Operation/Passenger/Anti Nuisance.)
Car Reaction: The front photo eye device is rendered inoperative.
Troubleshooting:
1. To restore the operation of the photo eye device, check the corresponding input.
2. Related inputs:
PhotoEyeFront: Normally low
Front Photo Eye Failure, FRONT PHOTO EYE FAIL
Description: This event is logged when the photo eye is continuously activated for a predetermined time (4
seconds) while the front doors are fully closed.
Car Reaction: The front photo eye is rendered inoperative.
Troubleshooting:
1. Check for abnormal blockage or failure of the front optical device.
2. Related inputs:
FrontPhotoEye: Normally low
Front Safe Edge Bypassed, FRONT SAFE EDGE BYP
Description: The front door safe edge has been continuously activated for a user-defined time and is now
bypassed according to the user-defined setting. (iView/Car Operation/Common/Door Device Bypass Timers.)
Car Reaction: The front safe edge is rendered inoperative.
Troubleshooting:
1. Check the state of the front safe edge input.
2. Related inputs:
SafeEdgeFront: Normally low
Front Safe Edge Failure, FRONT SAFE EDGE FAIL
Description: This event is logged when the front door safe edge is continuously activated for a predetermined
time (4 seconds) while the front doors are fully closed.
Car Reaction: The front door safe edge is rendered inoperative.
Troubleshooting:
1. Check for abnormal blockage or failure of the front door mechanical reopening device.
2. Related inputs:
FrontSafeEdge: Normally low
6-40 Manual # 42-02-2222
iControl Messages