Table of Contents
Advertisement
iView - Controller View
General - Floor Data Tab
Floor data settings provide information about floor openings, floor labels, and door boost.
Note
Rather than proceeding floor-by-floor, column-by-column, you may choose to select a column
head or multiple cells and use the "system wide" Select/Deselect controls to set all floors the
same for that topic (where appropriate). You can also move from field to field using the Tab key.
Floor Data Settings
• Floor: This is the floor number.
• Floor label: (Read only) The floor label is set on the System > Building tab.
• False Floor: Indicate whether or not this is a false floor (no openings).
• Front/Rear Opening: Indicate whether the car has front and/or rear opening doors. A
check mark indicates the opening is available.
• Door Boost Front/Rear: Enable/Disable Door Boost to compensate for heavy doors or
wind loading at a particular location.
9-96 Manual # 42-02-2222
For each floor:
Advertisement
Table of Contents
Troubleshooting
