MCi iControl User Manual page 550

iView - Controller View
Eligibility
eligibility settings for the eligibility configuration
selected by the Select configuration control.
• Select configuration: Select a configura-
tion (1 through 8) to edit. As soon as a con-
figuration is selected, the Eligibility table
will update to show the current settings for
that configuration.
• Cancel existing car calls that are no
longer eligible: For the configuration
selected, enable this setting if existing car
calls that would become ineligible when this
configuration is made active, should be
immediately canceled. If this option is not
enabled, existing car calls will be serviced.
To configure an eligibility configuration:
1. Select the desired configuration. Note
that the table updates accordingly.
2. On a per-floor basis, enable (check) or
disable (no check) front and/or rear car
calls to that floor.
3. When the configuration is complete, click
Send to store the changes on the iControl.
System wide operations: For high- or mid-rise buildings, use the system wide controls to speed
the configuration process:
1. Click on the Front or Rear column header
2. Click Select or Deselect.
Alternatively, you may drag through a number of floors below the column header, then use the
Select or Deselect control to set all highlighted floors.
Note
The "existence" of front and/or rear openings is determined by your selections on the preced-
ing, Floor Data tab. If an opening is not recognized to exist, it will not be selectable.
9-98 Manual # 42-02-2222
The table displays the current
.