Icontrol - MCi iControl User Manual

C
I ONTROL
iControl provides the latest in integrated digital elevator control. iControl brings premium per-
formance to elevators using AC motors. Controller parameters can be easily adjusted using
MCE iView software running on any Windows 2000 or better personal computer. All parame-
ters can be saved to a file on your computer hard drive, providing a secure archive. iView even
allows you to work "offline" in a saved controller file and easily write that data to a controller
later.
The sophisticated iControl distance and velocity feedback system is continuously aware of exact
car position and speed. The 32-bit processor provides smooth pattern generation for any appli-
cation— easily accommodating irregularities like short floors. Each iControl includes:
• The iBox, including onboard diagnostics
• Flux Vector Drive
The illustration below shows a typical iControl layout.
Figure 1.2 Cabinet Layout (typical)
Resistor cabinet
iBox
AC flux vector drive
iPower box
Standard cabinet dimensions:
Height = 62 inches (157.5 cm)
Width = 42 inches (107 cm)
Depth = 16 inches (41 cm)
Measurements are approximate

iControl

1
1-5