MCi iControl User Manual page 537

Shuttle Service Status
• Shuttle service status LED: LED is lighted when Shuttle service is On.
• Activate / Deactivate button: Software command used to turn Shuttle service On or Off.
Shuttle Floors and Car Call Disposition
• Cancel existing calls that are no longer eligible: Specifies that any calls that become
ineligible as a result of switching to the Shuttle Floors eligibility map will be canceled.
• Use current eligibility: If enabled, Shuttle service will use the car call eligibilities speci-
fied in the active car call configuration. Otherwise the "Shuttle Floors" map determines car
call eligibilities during Shuttle service operation.
• Shuttle Floors: Allows the user to create an alternate car call eligibility map to be used
during Shuttle service operation.
Home Floor Parking Permission
• No park: If no demand exists after the car completes a Shuttle service call, the car will
remain at the floor.
• Park - At floor: If no demand exists after the car completes a Shuttle service call, the car
will proceed to the specified floor and park.
• Front / Rear door time: Use the
"Edit" button to display the "Door
Timers" dialog and specify the
door behavior to be used when the
car parks. The options are:
• Closed
• Open
• Open for X seconds.
Home floor doors close when
are closed when the conditions of any of the following (that are checked) are met.
• Door Close Timer: The doors are closed when the door close timer expires. The timer
starts when the first car call is registered.
• Number of registered car calls: The doors are closed when the number of registered
car calls reaches this value.
• Door close button pressed: If calls are registered, momentary activation of the door
close button causes the doors to close.
• Heavy load status reached: The doors are closed when the car reaches heavy load sta-
tus.
Configuration - Car Operation
When the car is parked at the home floor, the doors
9
9-85