MCi iControl User Manual page 565

• Hall Calls - Main Front Down
• Hall Calls - Main Front Down Button (1 - 150): Non-serial inputs from front main
down hall call buttons.
• Hall Calls - Main Rear Down
• Hall Calls - Main Rear Down Button (1 - 150): Non-serial inputs from rear main down
hall call buttons.
• Hall Calls - Aux Front Up
• Hall Calls - Aux Front Up Button (1 - 150): Non-serial inputs from front aux up hall call
buttons.
• Hall Calls - Aux Rear Up
• Hall Calls - Aux Rear Up Button (1 - 150): Non-serial inputs from rear aux up hall call
buttons.
• Hall Calls - Main Front Up
• Hall Calls - Main Front Up Button (1 - 150): Non-serial inputs from front main up hall
call buttons.
• Hall Calls - Main Rear Up
• Hall Calls - Main Rear Up Button (1 - 150): Non-serial inputs from rear main up hall
call buttons.
• CFSS Calls - CFSS 1 Front
• CFSS Call - CFSS 1 Front Input (1 - 150): Non-serial inputs from CFSS 1 front call
switches.
• CFSS Calls - CFSS 1 Rear
• CFSS Call - CFSS 1 Rear Input (1 - 150): Non-serial inputs from CFSS 1 rear call
switches.
• CFSS Calls - CFSS 2 Front
• CFSS Call - CFSS 2 Front Input (1 - 150): Non-serial inputs from CFSS 2 front call
switches.
• CFSS Calls - CFSS 2 Rear
• CFSS Call - CFSS 2 Rear Input (1 - 150): Non-serial inputs from CFSS 2 rear call
switches.
• Hall Call Enable 1 (2) - Floor
• Hall Call Enable 1 (2) - Floor (1 - 150): Non-serial floor inputs from Hall call enable 1
(2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Front
• Hall Call Enable 1 (2) - Front, Floor (1 - 150): Non-serial front inputs from Hall call
enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Rear
• Hall Call Enable 1 (2) - Rear, Floor (1 - 150): Non-serial rear inputs from Hall call
enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Main Front
• Hall Call Enable 1 (2) - Main Front, Floor (1 - 150): Non-serial main front inputs from
Hall call enable 1 (2) devices (card reader or keypad etc.).
Configuration - I/O Boards
9
9-113