Configuration - Car Call Enable - MCi iControl User Manual

iView - Controller View

Configuration - Car Call Enable

Car Call Enable inputs are used with card reader or key switch security devices. The inputs are
programmed using the Controller > Configuration > I/O Boards tab. When Elevator Security is
on, the appropriate car call enable input must be activated in order for a call to be registered to
the corresponding secured floor. This screen allows you to specify the polarity (active high or
active low) of the Car call enable 1 and 2 inputs. Other parameters relating to these inputs are
programmed using iCue.
9-28 Manual # 42-02-2222