Configuration - I/O Boards - MCi iControl User Manual

iView - Controller View

Configuration - I/O Boards

Caution
The input/output structure of your system was collected during the MCE field survey. This
controller and cartop box are structured as shown in your job prints to reflect survey infor-
mation. By incorrectly assigning inputs and/or outputs, you may disable parts of your sys-
tem. Be certain that you understand what changes need to be made before beginning.
Contact MCE Technical Support for information. IN NORMAL INSTALLATIONS, YOU
WILL NOT NEED TO ASSIGN INPUTS AND OUTPUTS. THEY WILL ALREADY BE
ASSIGNED AS SHOWN ON YOUR JOB PRINTS.
The circuit board complement of the iController (IMP), iLink (CTP) and Serial Car Operating
Panel (COP 1 - 4)) can be changed if required. When boards are added or connections are
changed, this tab allows you to reassign inputs and outputs accordingly.
IMP / CTP
tab), a Multiple Input AC (ICE-MIAC) board connected to the iBox Main Processor (ICE-IMP)
board is selected for editing. When the edit button is clicked, the Terminal Configuration (IMP -
MIAC) dialog, shown on the following page, is displayed.
9-100 Manual # 42-02-2222
In the window shown below (Configuration > I/O Boards > Configuration