MCi iControl User Manual page 566

iView - Controller View
• Hall Call Enable 1 (2) - Main Rear
• Hall Call Enable 1 (2) - Main Rear, Floor (1 - 150): Non-serial main rear inputs from
Hall call enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Aux Front
• Hall Call Enable 1 (2) - Aux Front, Floor (1 - 150): Non-serial aux front inputs from
Hall call enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Aux Rear
• Hall Call Enable 1 (2) - Aux Rear, Floor (1 - 150): Non-serial aux rear inputs from Hall
call enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Aux Front Down
• Hall Call Enable 1 (2) - Down Aux Front, Floor (1 - 150): Non-serial down aux front
inputs from Hall call enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Aux Rear Down
• Hall Call Enable 1 (2) - Down Aux Rear, Floor (1 - 150): Non-serial down aux rear
inputs from Hall call enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Aux Rear Up
• Hall Call Enable 1 (2) - Up Aux Rear, Floor (1 - 150): Non-serial up aux rear inputs
from Hall call enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Main Front Down
• Hall Call Enable 1 (2) - Down Main Front, Floor (1 - 150): Non-serial down main front
inputs from Hall call enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Main Rear Down
• Hall Call Enable 1 (2) - Down Main Rear, Floor (1 - 150): Non-serial down main rear
inputs from Hall call enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Main Front Up
• Hall Call Enable 1 (2) - Up Main Front, Floor (1 - 150): Non-serial up main front inputs
from Hall call enable 1 (2) devices (card reader or keypad etc.).
• Hall Call Enable 1 (2) - Main Rear Up
• Hall Call Enable 1 (2) - Up Main Rear, Floor (1 - 150): Non-serial up main rear inputs
from Hall call enable 1 (2) devices (card reader or keypad etc.).
• CFSS 1 (2) Enable 1 (2) - Floor
• CFSS 1 (2) Enable 1 (2) - Floor (1 - 150): Non-serial CFSS mode 1 (2) inputs from Hall
call enable 1 (2) devices (card reader or keypad etc.).
• CFSS 1 (2) Enable 1 (2) - Front
• CFSS 1 (2) Enable 1 (2) - Front, Floor (1 - 150): Non-serial CFSS mode 1 (2) front
inputs from Hall call enable 1 (2) devices (card reader or keypad etc.).
• CFSS 1 (2) Enable 1 (2) - Rear
• CFSS 1 (2) Enable 1 (2) - Rear, Floor (1 - 150): Non-serial CFSS mode 1 (2) rear inputs
from Hall call enable 1 (2) devices (card reader or keypad etc.).
• User Defined Events
• User Event (1 - 10): Activation of a User Event (1 - 10) input causes the corresponding
User Event (1 - 10) to be activated (Configuration > User-Defined Inputs tab).
9-114 Manual # 42-02-2222