Table of Contents
Advertisement
System View Windows and Tabs
System - Configuration Tabs
System parameter settings are displayed and may be changed on the System - Configuration
tabs. The Configuration tabs may be accessed in one of two ways.
1. While in System view
from the View > Configuration menu.
2. Display all of the Configuration tabs by selecting Configuration from the View > Layouts
menu. Then click the desired configuration tab.
System - Diagnostic Tabs
The System - Diagnostic tabs contain information about the status and condition of the system.
The Diagnostic tabs can be accessed in one of two ways.
1. Select the desired tab from the View > Diagnostics menu.
2. Display all of the Diagnostic tabs by selecting Diagnostics from the View > Layouts
menu. Then click the desired diagnostics tab.
Additional Windows
Additional windows can be accessed from the View menu. They include:
• Hoistway
• System Performance
• Layouts
Table 8.7 System - View Menu
Window
Configuration
Diagnostics
Hoistway
System Performance
Layouts
(see "Selecting System View" on page
System parameter settings are displayed and may be changed on the Configura-
tion tabs. The tabs include Emergency Power, System Configuration, Legacy
Group Interface, Security, System I/O, Timer Tables, User Inputs and User Out-
puts
(see page
10-2).
The System Diagnostic tabs contain information about the status and condition of
the system. The tabs include Event Log
A graphical representation of the cars in the system hoistways, including
assigned car and hall calls. Shows the current mode of operation, direction pref-
erence and current floor for each elevator
Graphical representation of system performance statistics
Use to load Configuration, Diagnostic or Custom layouts
iView Windows and Tabs
10-1), select the desired tab
Content
(see page
10-68).
(page
10-70).
(see page
(see page
8
10-74).
10-75).
8-31
Advertisement
Table of Contents
Troubleshooting
