Ice-Fml Field Module Logic Board Quick Reference - MCi iControl User Manual

ICE-FML Field Module Logic Board Quick Reference

iField Modules are used to supply power to the brake on iControl AC and DC systems and to the
motor field on iControl with DC drive. The iField Modules used for both purposes are the same,
with the exception of the wiring to terminal J7 on the ICE-FMP, Field Module Power Board.
Inputs: 70 VAC min, 300 VAC max, 1 Phase, 50/60Hz, 42 AMPS Maximum
Outputs: 0 VDC minimum, 265 VDC maximum, 45 AMPS Maximum
OVER-CURRENT PROTECTION REQUIRED ON INPUT
- For loads up to 30A - use Bussman type FNQ or LittleFuse type FLQ
- For loads over 30A - use Ferraz Shawmut type A50QS80-4 or LittleFuse type L50S80
Figure 6.4 ICE-FML Field Module Logic Board
TP GND
TP ISO GND
TP +15 ISO
TP BT1
TP BT2
To ICE-FMP
board
iControl Circuit Board Quick References
IFIELD-MODULE Specifications
TP +15
TP 60Hz Ref
TP -15
Terminals
Indicators
1
+15ISO OK
2
F. BAD
Fan
+15 OK
Fan2
HI TEMP
Temp1
IGBT FLT
Temp2
TP VI1
TP VI2
R74
Terminals on
FMP board
FMO+
FMO-
FMSI
FMCI
FMHC
FMS1
FMS2
6
FMLD
FMSO
FMX1
FMX2
To SAF
board
6-93