MCi iControl User Manual page 306

Troubleshooting
Table 6.3 iControl Messages
Elevator Recall Operation (Switch 'n'), ELEVATOR RECALL SW'n' (n = 1 to 6)
Description: Elevator Recall Operation has been initiated by the switch identified.
Car Reaction: In most usages, the car immediately removes itself from hall call service, answers remaining
car calls, then proceeds to the recall floor and cycles its doors. (The disposition of car calls, recall floor, and
door operation are user-programmable. iView/Car Operation/Elevator Recall.)
Emergency Alarm Acknowledged
Description: This message indicates that the emergency alarm has been acknowledged and reset by the
Emergency Alarm Reset input.
Car Reaction: The Distress Light and the Distress Buzzer outputs will be extinguished.
Troubleshooting: NA
Emergency Alarm Activated (Alarm button), Emergency Alarm Activated, EMERG ALARM ACTI-
VATED
Description: The Emergency Alarm input has been activated. Typically used to sound an alarm and/or illumi-
nate an indicator light to alert security personnel.
Car Reaction: The Distress Light will be illuminated until it is acknowledged by the Emergency Alarm Reset
input. The Distress Buzzer output will either pulsate or is continuously activated as long as the car remains in
this condition.
Troubleshooting:
1. Attend to the car and verify the distress signal.
2. To reset the alarm, verify that the alarm button is restored to normal condition and activate the Emer-
gency Alarm Reset input.
Emergency Alarm Activated (Car delayed with doors closed)
Description: This message indicates that the emergency alarm has been activated due to the car being
delayed with its doors closed. This is an optional emergency alarm monitor specified by the user.
Car Reaction: The Distress Light will be illuminated until it is acknowledged by the Emergency Alarm Reset
input. The Distress Buzzer output will be active as long as the car remains in this condition.
Troubleshooting:
1. Attend to the car and verify the distress signal.
2. To reset the alarm, verify that the car condition is restored to normal and activate the Emergency Alarm
Reset input.
Emergency Alarm Activated (In-car stop switch)
Description: This message indicates that the emergency alarm has been activated due to the in-car emer-
gency stop switch being pulled.
Car Reaction: The Distress Light will be illuminated until it is acknowledged by the Emergency Alarm Reset
input. The Distress Buzzer output will be active as long as the switch remains active.
Troubleshooting:
1. Attend to the car and verify the distress signal.
2. To reset the alarm, verify that the car emergency stop switch is restored to normal position and activate
the Emergency Alarm Reset input.
Emergency Alarm Activated (Safety opened)
Description: This message indicates that the emergency alarm has been activated due to the safety circuit
being opened (excluding the in-car emergency stop switch). This is an optional emergency alarm monitor
specified by the user.
Car Reaction: The Distress Light will be illuminated until it is acknowledged by the Emergency Alarm Reset
input. The Distress Buzzer output will be active as long as the car remains in this condition.
Troubleshooting:
1. Attend to the car and verify the distress signal.
2. To reset the alarm, verify that the car condition is restored to normal and activate the Emergency Alarm
Reset input.
6-30 Manual # 42-02-2222
iControl Messages