Table of Contents
Advertisement
iControl Description
Active Displays
The Virtual Oscilloscope allows you to display and track two signals over time simultaneously.
The selected signal values are shown on the Test point 1 and 2 displays and output on the STP 1
and STP 2 physical test points on the iBox.
Active Displays may also be relabeled and modified to
suit your immediate needs. Once an edited display is
closed, it reverts to its default values. Edit a display by
right-clicking on a graph or scale and selecting Edit
from the popup menu. A wide variety of editing choices
are available.
You may also choose to enable/disable graph animation
(tracking) or zoom the display.
1-14 Manual # 42-02-2222
Please refer to "Controller - Layouts" on page
9-153.
Advertisement
Table of Contents
Troubleshooting
