Default Calls Button - MCi iControl User Manual

iView - System View

Default Calls Button

This selection defaults the address assignments to building condition settings (numbers of
floors and cars, and call types). This is an excellent way to begin setting up I/O addressing if
required. If selected, a warning is displayed:
Configure Button
This selection allows the system to automatically configure inputs and outputs of a type you
select.
For example:
1. Click in the Starting Node Address column to select the address at which you want auto-
matic assignment to begin.
2. Click in the Input/Output column to select an input or output group you would like to
assign.
3. Set whether you want addresses assigned sequentially from the starting address you
selected or whether you want the addresses assigned to every tenth location.
4. Set whether or not existing programming, if any, for the address range affected should
be overwritten.
5. Click OK to automatically assign the selected input type to the addresses.
As noted in the Auto Configure dialog, we recommend you begin by clicking the Default calls
button. You can then assign calls to addresses, and then run Auto Configure beginning with an
unused input beyond the call assignments.
10-52 Manual # 42-02-2222