MCi iControl User Manual page 441

Table 8.5 Controller - Setup Tabs
Tab
Brake Calibrate the brake voltage settings
Counterweight Learn the position where counterweight is adjacent to the car
page
Drive Learn the values for the Drive Offsets
Floor Heights Learn the absolute floor positions (distance to each floor from the lowest landing). Also
used to assist in measuring and entering the floor offsets (deviation of floor magnet
position from actual floor stopping position)
and
Load Weigher Learn the car empty and full load weights
Safety Verify that the configurations of the main and safety processors match. Perform the
Inventory learn procedure
Terminal Switches Learn the speeds and positions of the normal and emergency terminal switches
page 4-9
Table 8.6 Controller - Miscellaneous Dialogs/Controls
Tab
Call Allows you to register car and hall calls. This control is accessed by clicking the Call
Registration Registration button on the button bar
Firmware Update Guides you through the process of updating iControl firmware. This control is accessed
by selecting Firmware Update from the File menu
Refresh Updates the information displayed on iView windows and tabs. This control is accessed
by clicking the Refresh button on the button bar.
9-141).
page 9-145).
(see page 9-147
and page 9-151).
iView Windows and Tabs
Content
(see page 2-48 and page
(see page 2-48 and page
(see page 4-2, page 4-26, page 9-143
(see page 4-32 and
and page 9-150).
Content
(see page 9-154).
(see page 9-155).
9-140).
(see page 3-28 and
9-142).
page 9-146).
(see
8-29
8