MCi iControl User Manual page 563

• Rear Door Photo Eye: Input from rear door photo eye.
• Rear door safe edge: Input from rear door safe edge.
• Rear Door Stop Button (COP1): Input from rear main door stop button (active low).
• Rear Hall Door Close Button: Input from a rear hall door close button.
• Rear Hall Door Hold Button: Input from a rear hall door hold button.
• Rear Hall Door Open Button: Input from a rear hall door open button.
• Rear Hall Door Stop Button: Input from a rear hall door stop button (active low).
• Rear Momentary Pressure Close: Activation overrides rear door close software setting.
• Rear Momentary Pressure Open: Activation overrides rear door open software setting.
• Rear Photo Eye Cut Out: Input from the rear key switch that disables rear door photo
eye operation.
• Car Calls - Front COP1:
• Car Call - Front COP1 button, Floor 1 —150: Inputs from front car call buttons for non-
serial, front, car operating panel 1.
• Sequential Step Scan Up Front COP 1:
• Sequential Step Scan Down Front COP1:
• Disable Front COP 1: Input used to disable the front car call and door buttons of the
main Car Operating Panel.
• Car Calls - Rear COP1
• Car Call - Rear COP 1 button, Floor 1 —150: Inputs from rear car call buttons for non-
serial, rear, car operating panel 1.
• Sequential Step Scan Up Rear COP 1:
• Sequential Step Scan Down Rear COP1:
• Disable Rear COP 1: Input used to disable the rear car call and door buttons of the
main Car Operating Panel.
• Car Calls - Front COP2
• Car Call - Front COP 2 button, Floor 1 —150: Inputs from front car call buttons for
non-serial, front, car operating panel 2.
• Sequential Step Scan Up Front COP 2:
• Sequential Step Scan Down Front COP2:
• Disable Front COP 2: Input used to disable the front car call and door buttons of the
auxiliary Car Operating Panel.
• Car Calls - Rear COP2
• Car Call - Rear COP 2 button, Floor 1 —150: Inputs from rear car call buttons for non-
serial, rear, car operating panel 2.
• Sequential Step Scan Up Rear COP 2:
• Sequential Step Scan Down Rear COP2:
• Disable Rear COP 2: Input used to disable the rear car call and door buttons of the aux-
iliary Car Operating Panel
Configuration - I/O Boards
Sequential step scan car calls
Sequential step scan car calls
Sequential step scan car calls
Sequential step scan car calls
Sequential step scan car calls
Sequential step scan car calls
Sequential step scan car calls
Sequential step scan car calls
option input.
option input.
option input.
option input.
option input.
option input.
9
option input.
option input.
9-111