Debug Ipv6 Ospf Route - Allied Telesis x510-28GTX Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
DEBUG IPV OSPF ROUTE

debug ipv6 ospf route

Overview This command enables debugging of route calculation. Use this command
without parameters to turn on all the options.
The no and undebug variants of this command disable IPv6 OSPF route
debugging. Use this command without parameters to disable all options.
Syntax debug ipv6 ospf route [ase] [ia] [install] [spf]
no debug ipv6 ospf route [ase] [ia] [install] [spf]
Mode Privileged Exec and Global Configuration
Examples To enable IPv6 route debugging of inter-area route calculations, use the following
command:
awplus#
Related terminal monitor
Commands
undebug ipv6 ospf route
C613-50170-01 Rev B
Parameter Description
ase
Specifies the debugging of external route calculation.
ia
Specifies the debugging of inter-area route calculation.
install
Specifies the debugging of route installation.
spf
Specifies the debugging of SPF calculation.
debug ipv6 ospf route ia
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1104