OSPF
3
IP
6 C
V
FOR
V
OMMANDS
6
DEBUG IPV
OSPF IFSM
debug ipv6 ospf ifsm
Overview
This command specifies debugging options for IPv6 OSPF Interface Finite State
Machine (IFSM) troubleshooting.
To enable all debugging options, specify debug ipv6 ospf ifsm with no additional
parameters.
The no and undebug variants of this command disable IPv6 OSPF IFSM
debugging. Use these commands without parameters to disable all the options.
debug ipv6 ospf ifsm [events] [status] [timers]
Syntax
no debug ipv6 ospf ifsm [events] [status] [timers]
Mode
Privileged Exec and Global Configuration
Example
To specify IPv6 OSPF debugging options to display IPv6 OSPF IFSM events
information, use the following commands:
awplus#
Related
terminal monitor
Commands
undebug ipv6 ospf ifsm
C613-50170-01 Rev B
Parameter
Description
events
Displays IFSM event information.
status
Displays IFSM status information.
timers
Displays IFSM timer information.
debug ipv6 ospf ifsm events
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1100