Bgp Bestpath Router-Id Ignore - Dell Z9500 Command Reference Manual

Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
6.3.1.0
Usage The MED is a 4-byte unsigned integer value and the default behavior is to assume a
Information missing MED as 4294967295. This command causes a missing MED to be treated
as 0. During path selection, paths with a lower MED are preferred over paths with a
higher MED.

bgp bestpath router-id ignore

Do not compare router-id information for external paths during best path selection.
Z9500
Syntax
bgp bestpath router-id ignore
To return to the default selection, use the no bgp bestpath router-id
ignore command.
Defaults Disabled
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
Border Gateway Protocol
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
Description
Introduced on the Z9500.
Introduced on the S4820T.
369