Questions For Equipment; The Equipment Does Not Work At All; No Icons Or Sings Are Displayed On The Touch Panel; (The Main Power Lamp And The [Energy Saver] Button Light.) - Toshiba E-STUDIO 2020AC Frequently Asked Questions Manual

Questions for Equipment

0.
 The equipment does not work at all.
If the equipment cannot be booted, the power cable may not be securely inserted into the outlet. Insert the power
cable into the outlet until it comes to a stop.
If the problem still persists, contact your service representative.
 No icons or sings are displayed on the touch panel. (The MAIN POWER lamp and the
[ENERGY SAVER] button light.)
If no icons or signs are displayed on the touch panel even though the power is turned ON, the equipment is in the
Sleep mode or the Super Sleep mode. Press the [ENERGY SAVER] button to clear the Sleep mode or the Super Sleep
mode.
 No icons or sings are displayed on the touch panel. (Only the MAIN POWER lamp lights.)
The power of the equipment may not be turned ON. Press the [POWER] button.
If the problem still persists, contact your service representative.
 The touch panel is dim.
The contrast of the touch panel is adjusted lower. From the touch panel of the equipment, press [User Functions -
User-] and select the [User] tab > [General] > [Display Setting] to adjust the contrast lighter. For details, see the
reference below:
User Functions - SETTING ITEMS (User) - General - Adjusting the display setting
 Buttons on the control panel do not work. ("Saving energy - press Energy Saver
button." appears on the touch panel.)
The equipment is in the energy saving mode. Press the [ENERGY SAVER] button to clear the energy saving mode.
 Buttons on the control panel do not work. (The MAIN POWER lamp and the [ENERGY
SAVER] button light.)
If buttons on the control panel do not work even though the power is turned ON, the equipment is in the Sleep mode
or the Super Sleep mode. Press the [ENERGY SAVER] button to clear the Sleep mode or the Super Sleep mode.
 Buttons on the control panel do not work. (Only the MAIN POWER lamp lights.)
The power of the equipment may not be turned ON. Press the [POWER] button.
If the problem still persists, contact your service representative.
 Buttons on the control panel or icons on the touch panel do not work.
A system-related error has occurred.
Press the [POWER] button for at least 5 seconds to shut down the equipment.
If the problem still persists, contact your service representative.
 The window "Enter Department Code" appears.
The equipment is managed under the department management function. Enter your department code. If you do not
know it, ask your administrator.
 The window "Enter the user name and Password" appears.
The equipment is managed under the user management function. Enter your user name and password. If you do not
know them, ask your administrator.
12 Questions for Equipment