Sram Board <For Lgc Board> - Toshiba e-STUDIO2330C Service Handbook

7.1.12 SRAM board <for LGC board>
(1) Take off the board cover.
P.7-2 "7.1.2 Board cover"
(2) Release 2 latches and take off the SRAM
board for the LGC board with the case.
(3) Release 2 latches and take off the SRAM
board for LGC board from the case.
Note:
The shape of the SRAM board for the LGC
board differs from the one for the SYS board.
Be sure to assemble the correct SRAM
board.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
REPLACEMENT OF PC BOARDS/HDD
Latch
SRAM board
(for LGC board)
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
7 - 12
Latch
Latch Case
Fig. 7-29
SRAM board
(for LGC board)
Case
Fig. 7-30
SRAM board
(for SYS board)
Fig. 7-31