Paper Misfeed In The Drawer Of The Tandem Large Capacity Feeder; Paper Misfeed In The Bypass Tray - Toshiba e-studio556 Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
 Paper misfeed in the drawer of the tandem large capacity feeder
1 Open the drawer of the tandem large capacity feeder,
and remove the misfed paper.
2 Check that there is no folded/curled paper or
overloading, and then close the drawer of the tandem
large capacity feeder.
Be sure that the height of the stacked paper does not exceed the
line indicated inside of the side guides.
 Paper misfeed in the bypass tray
Pull out the paper misfed on the bypass tray and
1
place it again.
If a sheet of paper is stained, folded or torn, replace it with a new one.
18 Clearing a Paper Misfeed
2
1