Specifications / Accessories / Options / Supplies - Toshiba e-STUDIO205L Service Handbook

1.

SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES

1.1 Specifications
Values in [[ ]] are for e-STUDIO205L, values in {{ }} are for e-STUDIO305, values in [ ] are for e-
STUDIO355, values in { } are for e-STUDIO455 and values in < > are for e-STUDIO355/455 in case
that the specification is different among e-STUDIO205L, e-STUDIO255, e-STUDIO305, e-
STUDIO355 and e-STUDIO455.
1.1.1 General
Type......................................... Desktop type (console type: when paper feed pedestal (PFP) and large
Original glass........................... Fixed type (the left rear corner used as guide to place originals)
Copy process .......................... Indirect electrophotographic process (dry)
Fixing method.......................... External heating STF fusing system
Photosensor type .................... OPC
Original scanning sensor......... Linear CCD sensor
Scanning light source .............. Xenon lamp
Reproduction ratio ................... Actual ratio: 100±0.5%
Resolution ............................... Scanning: 600 dpi x 600 dpi
Gradation................................. 256 steps
Paper feeding .......................... 2 drawers + Bypass feeding + LCF (optional)
Paper supply ........................... Standard drawers:
© 2009 TOSHIBA TEC CORPORATION All rights reserved
capacity feeder (LCF) are installed)
Zooming: 25 to 400% in increments of 1%
(25 to 200% when using RADF)
Printing: Equivalent to 2400 dpi x 600 dpi
2 drawers + Bypass feeding + 2 PFP (optional)
Stack height 60.5 mm, equivalent to 550 sheets; 80 g/m
Bond)): Depends on destinations or versions.
Bypass feeding:
Stack height 11 mm: equivalent to 100 sheets; 80 g/m
Bond)
PFP:(Option):
Two drawer: stack height 60.5 mm, 550 sheets; 80 g/m
Bond)
LCF:(Option)
Stack height 110 mm x 2: equivalent to 1000 sheets; 80 g/m
lb. Bond)
1 - 1
e-STUDIO205L/255/305/355/455
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1
2
(22 lb.
2
(22 lb.
2
(22 lb.
2
(22