Specifications / Accessories / Options / Supplies - Toshiba e-STUDIO 200L Service Manual

1.

SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES

1.1 Specifications
Values in { } are for e-STUDIO200L/202L and values in [ ] are for e-STUDIO280/280S/282/282S in
case that the specification is different among e-STUDIO200L/202L, e-STUDIO230/230L/232/232S
and e-STUDIO280/280S/282/282S.
Copy process
Type
Original table
Accepted originals
Single - sided original
MR-3016
50 ~ 127 g/m
MR-3018
35 ~ 157 g/m
Copy speed (Copies/min.)
e-STUDIO200L/202L
Paper size
A4, LT, B5, A5-R, ST-R
A4-R, B5-R, LT-R
B4, LG
A3, LD
e-STUDIO230/230L/232/232S
Paper size
A4, LT, B5, A5-R, ST-R
A4-R, B5-R, LT-R
B4, LG
A3, LD
e-STUDIO280/280S/282/282S
Paper size
A4, LT, B5, A5-R, ST-R
A4-R, B5-R, LT-R
B4, LG
A3, LD
* "–" means "Not acceptable".
* The copy speed in the above table are available when originals are manually placed for single side,
multiple copying.
June 2004 © TOSHIBA TEC
Indirect electrophotographic process (dry)
Desktop type (console type: when paper feed pedestal (PFP) and large
capacity feeder (LCF) are installed)
Fixed type (the left rear corner used as guide to place originals)
Sheet, book and 3-dimensional object. The reversing automatic document
feeder (RADF) only accepts paper which are not pasted or stapled. Carbon
paper are not acceptable either.
Maximum size: A3/LD
2
(13 lb. Bond - 34 lb. Bond)
2
(9.3 lb. Bond - 58 lb. Cover)
Bypass feed
Drawer
Size specified
20 20
19 19
18 18
16 16
Bypass feed
Drawer
Size specified
23 23
21.5 21.5
18 18
16 16
Bypass feed
Drawer
Size specified
28 28
21.5 21.5
18 18
16 16
e-STUDIO200L/202L/230/232/280/282 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 1
Double - sided original
2
50 ~ 105 g/m (13 lb. Bond - 28 lb. Bond)
2
50 ~ 157 g/m (13 lb. Bond - 58 lb. Cover)
PFP
Size not specified
16 20
16 19
16 18
16 16
PFP
Size not specified
16 23
16 21.5
16 18
16 16
PFP
Size not specified
16 28
16 21.5
16 18
16 16
LCF
20
–
–
–
LCF
23
–
–
–
LCF
28
–
–
–