Drawer Feed Copying (Upper Drawer Paper Feeding) - Toshiba e-STUDIO 200L Service Manual

4.2.3

Drawer feed copying (Upper drawer paper feeding)

1) Press the [START] button
o "READY" changes to "COPYING"
o Exposure lamp ON
o Scan motor ON o carriages -1 and -2 move forward
o Polygonal motor rotates in high speed
o Main motor and exit motor ON
- The drum, fuser unit, developer unit and exit roller are driven.
2) Drawer paper feeding
o Main charger, developer bias and discharge LED ON. Fans are rotated in high speed. Drawer
feed clutch ON.
- The pickup roller, feed roller, separation roller and transport roller start to rotate.
o Paper reaches the 1st transport sensor
- The 1st transport sensor is turned ON.
o Paper reaches the registration roller.
- The registration sensor is turned ON and aligning is performed.
o Drawer feed clutch OFF after a certain period of time
3) After the carriage operation:
o Registration clutch ON after a certain period of time Æ paper is transported to the transfer area.
o Copy counter operates
4) After the registration clutch is turned ON:
o Transfer charger ON after a certain period of time
o Copy counter operates
5) Completion of scanning
o Scan motor OFF
o Exposure lamp OFF
o Registration clutch OFF (after the trailing edge of the paper passed the registration roller)
o "READY (PRINTING)" is displayed
6) Paper exit
o Exit sensor detects the trailing edge of the paper
o Main charger, developer bias and discharge LED OFF
o Polygonal motor, main motor and exit motor OFF
o Drum, fuser unit and developer unit stop
o Fans return to the ready rotation
o "READY" is displayed and the equipment enters the ready mode
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 GENERAL OPERATION
4 - 3
4