Brake Master Cylinder Removal; Disconnect Brake Line; Remove Master Cylinder - Toyota Celica 2000 Repair Manual

BR-10
N
5 - - � - - - - o ,
--- - -
__,
_
w/o
ABS: (-:--
BRAKE
REMOVAL
REMOVE BATTERY
1.
DISCONNECT LEVEL WARNING SWITCH CONNEC-
2.
TOR
3. DRAW OUT FLUID WITH SYRINGE
NOTICE:
Do not let brake fluid remain on a painted surface. Wash it
off immediately.
MIT:
4.
DISCONNECT RESERVOIR HOSE
'\::���:--
-

DISCONNECT BRAKE LINE

5.
�- -- -- --
(a) w/o ABS:
Using SST disconnect the 5 brake lines from the master
cylinder and 3-way union.
SST
Torque: 1 5 N·m (155 kgf-cm, 11 ft·lbf)
w/ ABS:
(b)
Using SST. disconnect the 2 brake lines from the master
cylinder.
SST
Torque: 1 5 N-m (155 kgf-cm, 11 H-lbf)

REMOVE MASTER CYLINDER

6.
Remove the 2 mounding nuts.
(a )
Torque: 1 3 N-m (130 kgf-cm, 9 H-lbf)
w/o ABS:
(b)
Pull out the check valve bracket, 3-way and master cylin­
der_
wl ABS:
(c)
Pull out the check valve bracket and master cylinder.
Remove the gasket from the master cylinder.
(d)
BRAKf: MA .STEH CYLINDER
09023--001 0 0
09023-001 00