Show Ip Dhcp Binding - Dell Z9500 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Usage
Use this command on the interfaces where the DHCP clients are connected to
Information
forward the packets from clients to DHCP server and vice-versa.
Example
Dell(conf-if-te-0/0)#ipv6 helper-address
X:X:X:X::X
VRF
Global

show ip dhcp binding

Display the DHCP binding table.
Z9500
Syntax
show ip dhcp binding
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Example
Dell# show ip dhcp binding
IP address
1.1.1.253
Automatic
708
Description
Introduced on the S4810, S4820T, S6000, S6000–ON,
Z9000, and Z9500.
IPv6 helper address
VRF name.
Global address space
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Hardware address
00:00:00:00:00:10
Lease expiration
Jan 08 2014 23:57
Dynamic Host Configuration Protocol (DHCP)
Type