Related Commands - Dell PowerConnect W-7200 Series Reference Manual

Parameter
rf-optimization-profile
virtual-ap
voip-cac-profile
Usage Guidelines
AP groups are at the top of the configuration hierarchy. An AP group collects virtual AP definitions and
configuration profiles, which are applied to APs in the group.
Example
The following command configures a virtual AP profile to the "default" AP group:
(host)(config) #ap-group default
virtual-ap corpnet

Related Commands

View AP group settings using the command
Command History:
Release
ArubaOS 3.0
ArubaOS 3.2
ArubaOS 3.4.1
ArubaOS 5.0
ArubaOS 6.0
Command Information
Platforms
All platforms
104 | ap-group
Description
Configure coverage hole and interference detection.
"rf optimization-profile" on page
See
One or more profiles, each of which configures a
specified WLAN. See "wlan virtual-ap" on page
Configures voice over IP (VoIP) call admission
"wlan voip-cac-profile" on
control (CAC) options. See
page 1520.
This parameter requires the PEFNG license.
show ap-group.
Modification
Command introduced
Support for the mesh parameters was introduced
The voip-cac-profile parameter required the PEF license.
The voip-cac-profile parameter requires the PEFV license.
The enet-port-profile parameters parameters were introduced.
Licensing
Base operating system, except for
noted parameters
Range
—
540.
—
1512.
—
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Default
"default"
"default"
"default"