Set Spantree Lpthreshold - Enterasys N Standalone (NSA) Series Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
6.2.3.9

set spantree lpthreshold

Use this command to set the Loop Protect event threshold.
set spantree lpthreshold value
Syntax Description
value
Command Defaults
None. The default event threshold is 3.
Command Type
Switch command.
Command Mode
Read-Write.
Usage
The LoopProtect event threshold is a global integer variable that provides
protection in the case of intermittent failures. The default value is 3. If the event
counter reaches the threshold within a given period (the event window), then the
port, for the given SID, becomes locked (that is, held indefinitely in the blocking
state). If the threshold is 0, the ports are never locked.
Example
This example shows how to set the Loop Protect threshold value to 4:
Matrix(rw)->set spantree lpthreshold 4
6-130 Matrix NSA Series Configuration Guide
Specifies the number of events that must occur during the
event window in order to lock a port/SID. The default value
is 3 events. A threshold of 0 specifies that ports will never
be locked.