Show Snmp Notifyprofile - Enterasys N Standalone (NSA) Series Configuration Manual

5.3.7.7

show snmp notifyprofile

Use this command to display SNMP notify profile information. This associates target parameters to
an SNMP notify filter to determine who should not receive SNMP notifications.
show snmp notifyprofile [profile] [targetparam targetparam] [volatile |
nonvolatile | read-only]
Syntax Description
profile
targetparam
targetparam
volatile |
nonvolatile |
read-only
Command Defaults
If no parameters are specified, all notify profile information will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SNMP notify information for the profile named "area51":
Matrix(rw)->show snmp notifyprofile area51
--- SNMP notifyProfile information ---
Notify Profile
TargetParam
Storage type
Row status
(Optional) Displays a specific notify profile.
(Optional) Displays entries for a specific target
parameter.
(Optional) Displays notify filter entries of a specific
storage type.
= area51
= v3ExampleParams
= nonVolatile
= active
Matrix NSA Series Configuration Guide
SNMP Configuration Command Set
Configuring SNMP Notification Parameters
5-61