Show Ip Mroute - Enterasys N Standalone (NSA) Series Configuration Manual

12.2.7.11 show ip mroute

Use this command to display the IP multicast routing table. This table shows how a multicast
routing protocol, such as PIM and DVMRP, will forward a multicast packet. Information in the table
includes source network/mask and upstream neighbors. For more information on configuring
DVMRP, refer to Section
show ip mroute [unicast source address | multicast group address] [summary]
Syntax Description
unicast source
address | multicast
group address
summary
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
If no optional parameters are specified, detailed information about all source and
destination addresses will be displayed.
13.2.4.
(Optional) Displays information about a specific unicast
source address or multicast destination address.
(Optional) Displays a summary of information.
IP Configuration Command Set
Matrix NSA Series Configuration Guide
Configuring PIM
12-63