Show Gvrp - Enterasys N Standalone (NSA) Series Configuration Manual

VLAN Configuration Command Set
Enabling/Disabling GVRP
7.3.6.1

show gvrp

Use this command to display GVRP configuration information.
show gvrp [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, GVRP configuration information will be displayed
for all ports and the device.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display GVRP status for the device and for Fast Ethernet port 1 in port
group 2:
Matrix(rw)->show gvrp fe.2.1
Global GVRP status is enabled.
Port Number
-----------
fe.2.1
Table 7-4
Table 7-4 show gvrp Output Details
Output
Port Number
7-36 Matrix NSA Series Configuration Guide
(Optional) Displays GVRP configuration information for
specific port(s). For a detailed description of possible
port-string values, refer to
GVRP status
-----------
enabled
provides an explanation of the command output.
What It Displays...
Port designation. For a detailed description of possible
port-string values, refer to
Section 4.1.1.
Last PDU Origin
-----------------
00-e0-63-97-d4-36
Section 4.1.1.