Enterasys N Standalone (NSA) Series Configuration Manual page 393

Command Defaults
•
•
•
•
•
•
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example permits the "powergroup" to manage all MIBs via SNMPv3:
Matrix(rw)->set snmp access powergroup security-model usm
This example grants the "powergroup" SNMPv3 management access from all router modules when
operating in router mode:
Matrix(rw)->set snmp access powergroup security-model usm context router prefix
If security level is not specified, no authentication will be applied.
If context is not specified, access will be enabled for the default context. If
context is specified without a context match, exact match will be applied.
If read view is not specified none will be applied.
If write view is not specified, none will be applied.
If notify view is not specified, none will be applied.
If storage type is not specified, entries will be stored as permanent and will be
held through device reboot.
SNMP Configuration Command Set
Configuring SNMP Access Rights
Matrix NSA Series Configuration Guide 5-31