Set Port Flowcontrol - Enterasys N Standalone (NSA) Series Configuration Manual

4.3.7.2

set port flowcontrol

Use this command to enable or disable flow control settings for one or more ports.
set port flowcontrol port-string {receive | send | both}{enable | disable}
Syntax Description
port-string
receive | send |
both
enable | disable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable ports fe.3.1 through 5 to send and receive flow control packets:
Matrix(rw)->set port flowcontrol fe.3.1-5 both enable
Specifies port(s) for which to enable or disable flow
control. For a detailed description of possible port-string
values, refer to Section
Enables or disables the port(s) to receive, send, or receive
and send flow control packets.
Enables or disables flow control settings.
Matrix NSA Series Configuration Guide
Port Configuration Command Set
Setting Flow Control
4.1.1.
4-65