Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.16
clear spantree mstmap
Use this command to map a FID back to SID 0.
clear spantree mstmap fid
Syntax Description
fid
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to map FID 2 back to SID 0:
Matrix(rw)->clear spantree mstmap 2
6-28 Matrix NSA Series Configuration Guide
Specifies one or more FIDs to reset to 0.