Enterasys N Standalone (NSA) Series Configuration Manual page 337

Table 4-9 show lacp Output Details
Output
Aggregator
Actor
Partner
System Identifier
System Priority
Admin Key
Oper Key
Attached Ports
What It Displays...
LAG port designation. Each Matrix Series module provides
48 virtual link aggregator ports, which are designated in the
CLI as lag.0.1 through lag.0.48. Once underlying physical
ports (i.e.; fe.x.x, ge.x.x) are associated with an aggregator
port, the resulting Link Aggregation Group (LAG) is
represented with a lag.x.x port designation.
Local device participating in LACP negotiation.
Remote device participating in LACP negotiation.
MAC addresses for actor and partner.
System priority value which determines aggregation
precedence. Only one LACP system priority can be set on a
Matrix Series device, using either the set lacp asyspri
command (Section
(Section 4.5.4.13)
.
Port's administratively assigned key.
Port's operational key, derived from the admin key. Only
underlying physical ports with oper keys matching the
aggregator's will be allowed to aggregate.
Underlying physical ports associated with this aggregator.
Matrix NSA Series Configuration Guide
Configuring Link Aggregation
4.5.4.4), or the set port lacp command
Configuring LACP
4-101