Show Port Speed - Enterasys N Standalone (NSA) Series Configuration Manual

Port Configuration Command Set
Setting Speed and Duplex Mode
4.3.4.1

show port speed

Use this command to display the default speed setting on one or more ports.
show port speed [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, default speed settings for all ports will display.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the default speed setting for 1-Gigabit Ethernet port 14 in port
group 3:
Matrix(rw)->show port speed ge.3.14
default speed is 1000 on port ge.3.14.
4-42 Matrix NSA Series Configuration Guide
(Optional) Displays default speed setting(s) for specific
port(s). For a detailed description of possible
port-string values, refer to Section 4.1.1.