Clear Spantree Spanguardtrap Enable - Enterasys N Standalone (NSA) Series Configuration Manual

6.2.1.64

clear spantree spanguardtrap enable

Use this command to reset the Spanning Tree span guard trap function back to the default state of
enabled.
clear spantree spanguardtrapenable
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the span guard trap function to enabled:
Matrix(rw)->
clear spantree spanguardtrapenable
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix NSA Series Configuration Guide 6-77