11.2.4.30 show rmon filter
Use this command to display one or more RMON filter entries.
show rmon filter [index index | channel channel]
Syntax Description
index index |
channel channel
Command Defaults
If no options are specified, information for all filter entries will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display all RMON filter entries and channel information:
Matrix(rw)->show rmon filter
Index= 55508
----------------------------------------------------------
Data Offset
PktStatusMask
Owner
-----------------------------
Data
ff ff ff ff ff ff
-----------------------------
DataMask
ff ff ff ff ff ff
-----------------------------
DataNotMask
00 00 00 00 00 00
Logging And Network Management Command Set
(Optional) Displays information about a specific filter
entry, or about all filters which belong to a specific channel.
Channel Index= 628
0
PktStatus
0
PktStatusNotMask
ETS,NAC-D
Matrix NSA Series Configuration Guide
Configuring RMON
EntryStatus= valid
0
0
11-89