Show Spantree Lpthreshold - Enterasys N Standalone (NSA) Series Configuration Manual

6.2.3.10

show spantree lpthreshold

Use this command to display the current value of the Loop Protect event threshold.
show spantree lpthreshold
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current Loop Protect threshold value:
Matrix(rw)->show spantree lpthreshold
LoopProtect event threshold is set to 4
Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
Matrix NSA Series Configuration Guide 6-131