Show Port Ratelimit - Enterasys N Standalone (NSA) Series Configuration Manual

Port Priority and Rate Limiting Configuration Command Set
Configuring Port Traffic Rate Limiting
9.3.3.1

show port ratelimit

Use this command to show the traffic rate limiting configuration on one or more ports.
show port ratelimit [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, rate limiting information will be displayed for all
ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current rate limiting information for fe.2.1:
Matrix(rw)->show port ratelimit fe.2.1
Global Ratelimiting status is disabled.
Port
Number Index
----------- -----
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
fe.2.1
9-12 Matrix NSA Series Configuration Guide
(Optional) Displays rate limiting information for specific
port(s). For a detailed description of possible port-string
values, refer to
Threshold
(kB/s)
--------- ------------
1
2 discard
3
4
5
6
7
8
9
10
11
12
Section
Action Direction
---------
discard inbound
inbound
discard inbound
discard inbound
discard inbound
discard inbound
discard inbound
discard inbound
discard inbound
discard inbound
discard inbound
discard inbound
4.1.1.
Priority
List
-----------
0
0 disabled
0
0
0
0
0
0
0
0
0
0
Status
--------
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled