Enterasys N Standalone (NSA) Series Configuration Manual page 167

2.3.2.2 set router
Use this command to configure routing on a module.
set router module
Syntax Description
module
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set module 1 as a routing module:
Matrix(rw)->set router 1
Specifies the module to configure for routing. In the
Matrix DFE-Gold Series chassis and N standalone
devices, routing must be configured on module 1.
Matrix NSA Series Configuration Guide
Preparing the Device for Router Mode
Reviewing and Configuring Routing
2-141